Hardwood Flooring FAQs Toronto

Grade AB features a clean, uniform grain with minimal natural character, suited to contemporary and minimalist Toronto interiors. Grade ABC includes natural knots and mineral streaks for a warmer, more rustic look. Both grades share the same 3/4 inch European white oak construction and UV-cured aluminum oxide finish, so the choice is aesthetic, not a durability trade-off.

Yes. Free custom stain matching is included on every single Floors Toronto order at no additional cost, typically confirmed within one to two physical sample rounds before production begins. This applies equally to straight plank, herringbone, and chevron formats across any Toronto or GTA project.

Floors Toronto recommends maintaining indoor relative humidity near 35–55% year-round to protect hardwood through Toronto's seasonal swings, which can otherwise drop to 20–30% RH in winter and rise to 60–70% RH in humid summer weeks. A basic humidifier and consistent air conditioning schedule typically keep most Toronto homes within this target range.

Yes. Engineered hardwood is the standard, and often the only permitted, real hardwood option for Toronto condo concrete slabs, typically installed via glue-down or floating with acoustic underlay depending on the corporation's requirements. Floors Toronto tests slab moisture before any glue-down installation to prevent adhesive failure.

Floors Toronto engineered European white oak typically tolerates one to three refinishing cycles depending on wear-layer thickness and how well a Toronto home maintains 35–55% RH over its life. High-traffic rooms may need a screen-and-recoat sooner than quieter spaces to extend the interval before a full sand becomes necessary.

Floors Toronto installs using glue-down, floating, and nail-down methods, chosen based on subfloor type and building requirements. Concrete slabs in Toronto condo towers typically use glue-down or floating with acoustic underlay, while plywood subfloors in houses can use any of the three methods depending on the specific project.

Yes. Floors Toronto serves the wider Greater Toronto Area including Mississauga, Brampton, Vaughan, Richmond Hill, Markham, Oakville, Burlington, and Hamilton, alongside Toronto neighbourhoods like Yorkville, Rosedale, King West, Forest Hill, and the Annex. Installation logistics and lead times are confirmed at the quoting stage based on your specific location.

Floors Toronto straight plank ships at 7½", 9¼", and 10¼" widths, all at a uniform 3/4 inch thickness. Narrower 7½" suits bedrooms and smaller Toronto rowhouses, 9¼" is the most common GTA default, and 10¼" suits larger open-concept living rooms and lofts.

Herringbone is milled at 5 by 25 inches with a stepped zigzag joint, while chevron is milled at 5 by 25½ inches with a continuous mitred point. Both patterns use the same 3/4 inch European white oak and UV-cured aluminum oxide finish as every other Floors Toronto format, with free custom stain matching included.

Cost varies by width, grade, install method, and pattern complexity, with straight plank generally less expensive per square foot than herringbone or chevron due to lower material waste and labour time. Floors Toronto provides an itemized quote within one business day so a Toronto homeowner can see exactly what drives the final number.

Yes. Floors Toronto documents both a product warranty covering the European white oak and finish, and a separate installation warranty covering labour, provided in writing before work begins. Warranty coverage typically requires documented humidity care near 35–55% RH to remain valid over the life of a Toronto installation.

Yes, in many cases. Free custom stain matching can approximate an existing floor's colour for a Toronto addition, repair, or partial renovation, though an exact match depends on the original product's age, wear, and any fading that has occurred over time. Floors Toronto assesses the existing floor during a site visit before confirming feasibility.